References |
: |
[1]He F, Dong W, Wang J. Modeling and numerical investigation of transient two-phase flow with liquid phase change in porous media. Nanomaterials. 2021; 11(1):1-14.
|
[Crossref] |
[Google Scholar] |
[2]Wang CY. A fixed-grid numerical algorithm for two-phase flow and heat transfer in porous media. Numerical Heat Transfer. 1997; 32(1):85-105.
|
[Google Scholar] |
[3]Wang JH, Wang HN. A discussion of transpiration cooling problems through an analytical solution of local thermal nonequilibrium model. Journal of Heat and Mass Transfer.2006; 128(10):1093-8.
|
[Google Scholar] |
[4]Lu W, Zhao CY. Numerical modelling of flow boiling heat transfer in horizontal metalāfoam tubes. Advanced Engineering Materials. 2009; 11(10):832-6.
|
[Crossref] |
[Google Scholar] |
[5]Alomar OR, Mendes MA, Trimis D, Ray S. Simulation of complete liquid-vapor phase change inside divergent porous evaporator. International Journal of Materials, Mechanics and Manufacturing. 2014; 2(3):223-9.
|
[Google Scholar] |
[6]Xu HJ, Gong L, Zhao CY, Yang YH, Xu ZG. Analytical considerations of local thermal non-equilibrium conditions for thermal transport in metal foams. International Journal of Thermal Sciences. 2015; 95:73-87.
|
[Crossref] |
[Google Scholar] |
[7]Alomar OR. Numerical investigation of two-phase flow in a horizontal porous evaporator with localised heating using non-Darcian flow and two equations model. Heat and Mass Transfer. 2020; 56(4):1203-21.
|
[Crossref] |
[Google Scholar] |
[8]Alomar OR. Transient behaviour of heat transfer with complete evaporation process in porous channel with localised heating using non-darcian flow and LTNE model. Heat and Mass Transfer. 2021; 57(12):1921-48.
|
[Crossref] |
[Google Scholar] |
[9]Liu T, Su H, Chen Z, He F, Wang J. Numerical investigation on the transient transport and heat transfer characteristics of transpiration cooling with liquid phase change during coolant adjustment. Applied Thermal Engineering. 2022.
|
[Crossref] |
[Google Scholar] |
[10]Abdulmajeed BA, Jawad HR. CFD application on shell and double concentric tube heat exchanger. Journal of Engineering. 2019; 25(2):136-50.
|
[Crossref] |
[Google Scholar] |
[11]Chen X, Tavakkoli F, Vafai K. Analysis and characterization of metal foam-filled double-pipe heat exchangers. Numerical Heat Transfer, Part A: Applications. 2015; 68(10):1031-49.
|
[Crossref] |
[Google Scholar] |
[12]Hamzah JA, Nima MA. Numerical investigation of heat transfer enhancement of double pipe heat exchanger using metal foam fins. Journal of Engineering. 2019; 25(6):1-18.
|
[Google Scholar] |
[13]Mohammadi MH, Abbasi HR, Yavarinasab A, Pourrahmani H. Thermal optimization of shell and tube heat exchanger using porous baffles. Applied Thermal Engineering. 2020; 170:1-17.
|
[Crossref] |
[Google Scholar] |
[14]Nima MA, Hajeej AH. Experimental investigation of convection heat transfer enhancement in horizontal channel provided with metal foam blocks. Journal of Engineering. 2016; 22(5):144-61.
|
[Google Scholar] |
[15]Saleh AA, Rashid TA. Experimental and theoretical study for performance enhancement of air solar collectors by using different absorbers. Al-Khwarizmi Engineering Journal. 2016; 12(3):110-20.
|
[Google Scholar] |
[16]Arjun J, Annamalai M. Optimization of Foam Characteristics for Falling Film Evaporators. International refrigeration and air conditioning conference. 2018(pp.1-9).
|
[Google Scholar] |
[17]Stepanov O, Rydalina N, Antonova E. The use of porous metals in heat exchangers. In IOP conference series: materials science and engineering 2020 (p. 012150). IOP Publishing.
|
[Crossref] |
[Google Scholar] |
[18]Dehghan M, Jamal-Abad MT, Rashidi S. Analytical interpretation of the local thermal non-equilibrium condition of porous media imbedded in tube heat exchangers. Energy Conversion and Management. 2014; 85:264-71.
|
[Crossref] |
[Google Scholar] |
[19]Xu HJ, Qu ZG, Tao WQ. Numerical investigation on self-coupling heat transfer in a counter-flow double-pipe heat exchanger filled with metallic foams. Applied Thermal Engineering. 2014; 66(1-2):43-54.
|
[Crossref] |
[Google Scholar] |
[20]Trilok G, Kumar KK, Gnanasekaran N, Mobedi M. Numerical assessment of thermal characteristics of metal foams of orderly varied pore density and porosity under different convection regimes. International Journal of Thermal Sciences. 2022.
|
[Crossref] |
[Google Scholar] |
[21]Paknahad R, Siavashi M, Hosseini M. Pore-scale fluid flow and conjugate heat transfer study in high porosity Voronoi metal foams using multi-relaxation-time regularized lattice Boltzmann (MRT-RLB) method. International Communications in Heat and Mass Transfer. 2023.
|
[Crossref] |
[Google Scholar] |
[22]Diganjit R, Gnanasekaran N, Mobedi M. Numerical study for enhancement of heat transfer using discrete metal foam with varying thickness and porosity in solar air heater by LTNE method. Energies. 2022; 15(23).
|
[Crossref] |
[Google Scholar] |
[23]Tamkhade PK, Lande RD, Gurav RB, Lele MM. Investigations on tube in tube metal foam heat exchanger. Materials Today: Proceedings. 2023; 72:951-7.
|
[Crossref] |
[Google Scholar] |
[24]Iranmanesh A, A. Moshizi S. Flow and heat transfer study of an annulus partially filled with metallic foam on two wall surfaces subject to asymmetrical heat fluxes. Arabian Journal for Science and Engineering. 2023:1-8.
|
[Crossref] |
[Google Scholar] |
[25]Maiorano LP, Castillo R, Molina JM. Al/Gf composite foams with SiC-engineered interfaces for the next generation of active heat dissipation materials. Composites Part A: Applied Science and Manufacturing. 2023.
|
[Crossref] |
[Google Scholar] |
[26]Ginting FH, Tetuko AP, Asri NS, Nurdiyansah LF, Setiadi EA, Humaidi S, et al. Surface treatment on metal foam wick of a ferrofluid heat pipe. Surfaces and Interfaces. 2023:1-11.
|
[Crossref] |
[Google Scholar] |
[27]George GR, Bockelmann M, Schmalhorst L, Beton D, Gerstle A, Lindermeir A, et al. Optimization of metal foam pellet shape in packed beds for improved radial heat transfer using particle-resolved computational fluid dynamics. Chemical Engineering and Processing-Process Intensification. 2023.
|
[Crossref] |
[Google Scholar] |
[28]Gao W, Xu X, Liang X. Flow boiling of R134a in an open-cell metal foam mini-channel evaporator. International Journal of Heat and Mass Transfer. 2018; 126:103-15.
|
[Crossref] |
[Google Scholar] |
[29]Nam S, Kim DY, Kim Y, Kim KC. Effect of metal foam insert configurations on flow boiling heat transfer and pressure drop in a rectangular Channel. Materials. 2021; 14(16).
|
[Crossref] |
[Google Scholar] |
[30]Li L, Yao H, Wang Y, Chen H, Zhu Y. Performance characteristics of the metal foam wick prepared by magnetron sputtering method. Journal of Thermophysics and Heat Transfer. 2021; 35(4):669-76.
|
[Crossref] |
[Google Scholar] |
[31]Nosrati A, Akhavan-Behabadi M, Sajadi B, Razi P, Mohammadi R. Experimental study on the effects of using metal foam on R-134a flow boiling in annular tubes. International Journal of Thermal Sciences. 2022.
|
[Crossref] |
[Google Scholar] |
[32]Kisitu D, Caceres C, Zlatinov M, Schaffarzick D, Ortega A. Experimental investigation of r134a flow boiling in copper foam evaporators for high heat flux electronics cooling. In international electronic packaging technical conference and exhibition 2022 (p. V001T08A003). American Society of Mechanical Engineers.
|
[Crossref] |
[Google Scholar] |
[33]Kang Y, Lang Z, Wu G, Zhao H. Synergistic effect of coating copper foam with carbon nanotubes on pool boiling heat transfer performance. Experimental Thermal and Fluid Science. 2023.
|
[Crossref] |
[Google Scholar] |
[34]Li H, Fan Z, Lai Q, Xie Y, Qiao L, Tan J. The effect of pulse heating on saturated boiling heat transfer in rough surfaces. Case Studies in Thermal Engineering. 2023.
|
[Google Scholar] |
[35]Yue SJ, Xu ZG. Numerical simulation on pore-scale pool boiling mechanisms of horizontal gradient porous metals. International Communications in Heat and Mass Transfer. 2023.
|
[Crossref] |
[Google Scholar] |
[36]Wang H, Ying QF, Lichtfouse E, Huang CG. Boiling heat transfer in copper foam bilayers in positive and inverse gradients of pore density. Journal of Applied Fluid Mechanics. 2023; 16(5):973-82.
|
[Crossref] |
[Google Scholar] |
[37]Nima M. Numerical study of phase change characteristics in a vertical and inclined porous channel using thermal nonequilibrium model. Journal of Porous Media. 2016; 19(12): 1099-121.
|
[Crossref] |
[Google Scholar] |
[38]Rohsenow WM. A method of correlating heat-transfer data for surface boiling of liquids. Transactions of the American Society of Mechanical Engineers. 1952; 74(6):969-75.
|
[Crossref] |
[Google Scholar] |
[39]Xiao H, Liu Z, Liu W. Conjugate heat transfer enhancement in the mini-channel heat sink by realizing the optimized flow pattern. Applied Thermal Engineering. 2021; 182.
|
[Crossref] |
[Google Scholar] |
[40]Patankar S. Numerical heat transfer and fluid flow. Taylor & Francis; 2018.
|
[Google Scholar] |
[41]Kaviany M. Principles of heat transfer in porous media. Springer Science & Business Media; 2012.
|
[Google Scholar] |
|