(Publisher of Peer Reviewed Open Access Journals)
Navigation

International Journal of Advanced Technology and Engineering Exploration (IJATEE)

ISSN (Print):2394-5443    ISSN (Online):2394-7454
Volume-9 Issue-89 April-2022
Full-Text PDF
Paper Title : An investigation of the ripple reduction capacity of compensated direct torque control with duty ratio optimization for permanent magnet synchronous motor drive
Author Name : Berhanu Deggefa Lemma and Srinivasan Pradabane
Abstract :

The performance of control algorithms is evaluated in both dynamic and steady-state conditions. Direct torque control (DTC) is the ideal option for situations that demand quick dynamics. Despite having the best dynamic response, conventional direct torque control (CDTC) has poor ripple and harmonic performance. The compensated direct torque control with duty ratio optimization (DTC-DRO) is proposed in this work to solve the shortcomings of CDTC. The other four control algorithms were applied to the identical case and their performance was compared to that of DTC-DRO to compare and contrast the ripple and harmonic reduction capabilities of DTC-DRO. For comparison purposes, current control (CC), CDTC, proportional-integral flux manipulated direct torque control (PIFM-DTC), and space vector pulse width modulation (SVPWM) were used. The comparison was made by taking key factors like the torque ripple performance, speed response performance, flux magnitude variation, stator current total harmonic distortion, and voltage total harmonic distortion. To simulate and compare the performance of each control strategy, the Matlab Simulink 2021b environment was utilized. The result of the simulation indicates that all DTC category methods have fast dynamic performance. But the performance of DTC-DRO is better than SVPWM in terms of dynamic and steady-state performance for the considered case. The voltage harmonic distortion, current harmonic distortion, and torque ripple performance of a DTC-DRO are better than those of all control techniques studied in this work. In general, DTC-DRO is suitable for a drive application where fast dynamics and less ripple are required.
Keywords : Compensation, Current control, Conventional DTC, PI flux manipulated DTC, Duty ratio optimized -DTC, Ripple, harmonic, Space vector pulse width modulation.
Cite this article : Lemma BD, Pradabane S. An investigation of the ripple reduction capacity of compensated direct torque control with duty ratio optimization for permanent magnet synchronous motor drive. International Journal of Advanced Technology and Engineering Exploration. 2022; 9(89):413-429. DOI:10.19101/IJATEE.2021.875445.
References :
[1]Bida VM, Samokhvalov DV, Al-mahturi FS. PMSM vector control techniques-a survey. In conference of Russian young researchers in electrical and electronic engineering (EIConRus) 2018 (pp. 577-81). IEEE.
[Crossref] [Google Scholar]
[2]Aydin M, Gulec M. A new coreless axial flux interior permanent magnet synchronous motor with sinusoidal rotor segments. IEEE Transactions on Magnetics. 2016; 52(7):1-4.
[Crossref] [Google Scholar]
[3]Demir Y, Aydin M. A novel dual three-phase permanent magnet synchronous motor with asymmetric stator winding. IEEE Transactions on Magnetics. 2016; 52(7):1-5.
[Crossref] [Google Scholar]
[4]Onsal M, Demir Y, Aydin M. A new nine-phase permanent magnet synchronous motor with consequent pole rotor for high-power traction applications. IEEE Transactions on Magnetics. 2017; 53(11):1-6.
[Crossref] [Google Scholar]
[5]Veena VS, Achari S, Ravichandran MH, Praveen RP. Vector control of three phase PMSM drive using power transformations for future spacecraft application. In international conference on circuits, power and computing technologies 2014 (pp. 313-9). IEEE.
[Crossref] [Google Scholar]
[6]Kumar KR, Nithin K, Kumar TV. Torque ripple reduction in PMSM drive based on instantaneous voltage control technique. In power India international conference 2016 (pp. 1-6). IEEE.
[Crossref] [Google Scholar]
[7]Dobzhanskyi O, Amiri E, Gouws R. Comparison analysis of electric motors with two degrees of mechanical freedom: PM synchronous motor vs induction motor. In international young scientists forum on applied physics and engineering 2016 (pp. 14-7). IEEE.
[Crossref] [Google Scholar]
[8]Mukhopadhyay J, Choudhuri S, Sengupta S. ANFIS based speed and current control with torque ripple minimization using hybrid SSD-SFO for switched reluctance motor. Sustainable Energy Technologies and Assessments. 2022.
[Crossref] [Google Scholar]
[9]Roque JP, Bolam RC, Vagapov Y, Anuchin A. Numerical analysis of an electric high-speed rim-driven rotor. In international workshop on electric drives: advances in power electronics for electric drives 2022 (pp. 1-4). IEEE.
[Crossref] [Google Scholar]
[10]Dianov A. Optimized field-weakening strategy for control of PM synchronous motors. In 29th international workshop on electric drives: advances in power electronics for electric drives 2022 (pp. 1-6). IEEE.
[Crossref] [Google Scholar]
[11]Lemma BD, Pradabane S. Ripple torque lessening in space vector pulse width modulation based direct torque control of permanent magnet synchronous motor drive. In journal of physics: conference series 2021 (pp. 1-7). IOP Publishing.
[Crossref] [Google Scholar]
[12]Shyu KK, Lin JK, Pham VT, Yang MJ, Wang TW. Global minimum torque ripple design for direct torque control of induction motor drives. IEEE Transactions on Industrial Electronics. 2009; 57(9):3148-56.
[Crossref] [Google Scholar]
[13]Zhang Y, Zhu J. Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency. IEEE Transactions on Power Electronics. 2010; 26(1):235-48.
[Crossref] [Google Scholar]
[14]Basit BA, Choi HH, Jung JW. An online torque ripple minimization technique for IPMSM drives: fuzzy system-based d-axis current design approach. IEEE Transactions on Industrial Electronics. 2020; 68(12):11794-805.
[Crossref] [Google Scholar]
[15]Shinohara A, Inoue Y, Morimoto S, Sanada M. Maximum torque per ampere control in stator flux linkage synchronous frame for DTC-based PMSM drives without using q-axis inductance. IEEE Transactions on Industry Applications. 2017; 53(4):3663-71.
[Crossref] [Google Scholar]
[16]Odo K, Ohanu C, Chinaeke-ogbuka I, Ajibo A, Ogbuka C, Ejiogu E. A novel direct torque and flux control of permanent magnet synchronous motor with analytically-tuned PI controllers. International Journal of Power Electronics and Drive Systems. 2021; 12(4):2103-12.
[Crossref] [Google Scholar]
[17]Liu Q, Hameyer K. Torque ripple minimization for direct torque control of PMSM with modified FCSMPC. IEEE Transactions on Industry Applications. 2016; 52(6):4855-64.
[Crossref] [Google Scholar]
[18]Vafaie MH, Dehkordi BM, Moallem P, Kiyoumarsi A. Improving the steady-state and transient-state performances of PMSM through an advanced deadbeat direct torque and flux control system. IEEE Transactions on Power Electronics. 2016; 32(4):2964-75.
[Crossref] [Google Scholar]
[19]Kim SJ, Kim JW, Park BG, Lee DH. A novel predictive direct torque control using an optimized PWM approach. IEEE Transactions on Industry Applications. 2021; 57(3):2537-46.
[Crossref] [Google Scholar]
[20]Wang M, Sun D, Zheng Z, Nian H. A novel lookup table based direct torque control for OW-PMSM drives. IEEE Transactions on Industrial Electronics. 2020; 68(10):10316-20.
[Crossref] [Google Scholar]
[21]Bu F, Yang Z, Gao Y, Pan Z, Pu T, Degano M, Gerada C. Speed ripple reduction of direct-drive PMSM servo system at low-speed operation using virtual cogging torque control method. IEEE Transactions on Industrial Electronics. 2020; 68(1):160-74.
[Crossref] [Google Scholar]
[22]El Afia A, Hasoun M, Khafallah M, Benkirane K. Efficiency improvement of dual three-phase permanent magnet synchronous motor using modified switching table DTC for electric ship propulsion. International Journal of Power Electronics and Drive Systems. 2021; 12(3):1315-25.
[Crossref] [Google Scholar]
[23]Elsherbiny H, Ahmed MK, Elwany MA. Online efficiency optimization of IPMSM for electric vehicles. International Journal of Power Electronics and Drive Systems. 2021; 12(3):1369-78.
[Crossref] [Google Scholar]
[24]Cheema MA, Fletcher JE, Xiao D, Rahman MF. A direct thrust control scheme for linear permanent magnet synchronous motor based on online duty ratio control. IEEE Transactions on Power Electronics. 2015; 31(6):4416-28.
[Crossref] [Google Scholar]
[25]Vafaie MH, Dehkordi BM, Moallem P, Kiyoumarsi A. A new predictive direct torque control method for improving both steady-state and transient-state operations of the PMSM. IEEE Transactions on Power Electronics. 2015; 31(5):3738-53.
[Crossref] [Google Scholar]
[26]Zhang Z, Liu X. A duty ratio control strategy to reduce both torque and flux ripples of DTC for permanent magnet synchronous machines. IEEE Access. 2019; 7:11820-8.
[Crossref] [Google Scholar]
[27]Niu F, Huang X, Ge L, Zhang J, Wu L, Wang Y, Li K, Fang Y. A simple and practical duty cycle modulated direct torque control for permanent magnet synchronous motors. IEEE Transactions on Power Electronics. 2018; 34(2):1572-9.
[Crossref] [Google Scholar]
[28]Zhang Z, Wei C, Qiao W, Qu L. Adaptive saturation controller-based direct torque control for permanent-magnet synchronous machines. IEEE Transactions on Power Electronics. 2015; 31(10):7112-22.
[Crossref] [Google Scholar]
[29]Xia C, Wang S, Gu X, Yan Y, Shi T. Direct torque control for VSI-PMSM using vector evaluation factor table. IEEE Transactions on Industrial Electronics. 2016; 63(7):4571-83.
[Crossref] [Google Scholar]
[30]Niu F, Li K, Wang Y. Direct torque control for permanent-magnet synchronous machines based on duty ratio modulation. IEEE Transactions on Industrial Electronics. 2015; 62(10):6160-70.
[Crossref] [Google Scholar]
[31]Nasr A, Gu C, Wang X, Buticchi G, Bozhko S, Gerada C. Torque-performance improvement for direct torque-controlled PMSM drives based on duty-ratio regulation. IEEE Transactions on Power Electronics. 2021; 37(1):749-60.
[Crossref] [Google Scholar]
[32]Ren Y, Zhu ZQ, Green JE, Li Y, Zhu S, Li Z. Improved duty-ratio-based direct torque control for dual three-phase permanent magnet synchronous machine drives. IEEE Transactions on Industry Applications. 2019; 55(6):5843-53.
[Crossref] [Google Scholar]
[33]Ma C, Yao X, Li H, De BF. An improved two-vector model predictive torque control based on RMS duty ratio optimization for PMSM. In international electric machines & drives conference 2019 (pp. 1674-9). IEEE.
[Crossref] [Google Scholar]
[34]Inoue T, Inoue Y, Morimoto S, Sanada M. Maximum torque per ampere control of a direct torque-controlled PMSM in a stator flux linkage synchronous frame. IEEE Transactions on Industry Applications. 2016; 52(3):2360-7.
[Crossref] [Google Scholar]
[35]Saeed MS, Song W, Yu B, Wu X. Low-complexity deadbeat model predictive current control with duty ratio for five-phase PMSM drives. IEEE Transactions on Power Electronics. 2020; 35(11):12085-99.
[Crossref] [Google Scholar]
[36]Hsu HY, Wu ZX, Hsieh MF. A simplified regulable duty cycle direct torque control method for permanent magnet synchronous motor. In international conference on electrical machines and systems.2021 (pp. 1730-5). IEEE.
[Crossref] [Google Scholar]